17
2020-02
If there is any deviation in the system, it will cause premature damage to the shaft, bearing or coupling, which means that it cannot be used in a high-speed environment because it cannot compensate for the relative displacement between the shafts caused by the high temperature generated by the high-speed operation.Of course, if the relative displacement can be successfully controlled, in the servo system application...
16
2020-02
1 Take out the elastic retaining ring for the hole with needle-nose pliers, and tap the threaded head of the steering shaft lightly and evenly with a copper hammer until the outer ring of the bearing comes out of the inner hole of the support, and pull out the steering shaft with bearing assembly from the lower end of the support .Note that when the copper hammer hits the threaded head of the steering shaft, measures should be taken to protect the thread to prevent the thread from deforming. ..
15
2020-02
When the coupling is installed on the shaft, the common installation methods are static press-in and dynamic press-in. The verticality and coaxiality of the coupling and the shaft should be carefully checked.Generally it depends on whether the fit of the shaft is a transition fit or an interference fit. Now let’s introduce the installation methods of the static press-in method and the dynamic press-in method: Static press-in method: this...
14
2020-02
The diaphragm coupling design is simple and easy to use. The produced diaphragm coupling can not only ensure a more stable structure, but also have very good practical effects in the whole process of long-term operation, and can also increase the bearing capacity. Exceed higher specifications.It is suggested that everyone must be able to integrate their own facts..
13
2020-02
The serpentine spring plate is made of high-quality spring steel, undergoes strict heat treatment, and is specially processed. It has good mechanical properties, so that the service life of the coupling is much longer than that of the non-metal elastic element coupling.The single flange serpentine spring coupling has good vibration damping and long service life.The coupling is a snake-shaped bullet..
12
2020-02
Air-conditioning has now entered every household. Air-conditioning can bring us warm in winter and cool in summer. Now many people can't leave the air-conditioning. Turn on the air-conditioning as the first thing when it comes to work or when returning home from get off work.Everyone knows that there are many sensors in air conditioners, the most important of which are temperature sensors and humidity sensors.They are in...
11
2020-02
How reliable is the diaphragm coupling?Will there be abnormalities in long-term operation?Will there be abnormalities in long-term operation?Nowadays, diaphragm couplings can be used in the maintenance of machinery and equipment in different manufacturing industries. The key reason is that they do have very good practical effects and can be fully developed..
19
2020-01
The elastic block coupling uses a number of block rubber elements to be embedded in the corresponding grooves at the ends of the two coupling halves to realize the connection of the two coupling halves. The outer and inner circumferences of the rubber elastic parts are embedded in the half coupling. In the radial groove of the shaft, the middle part of the rubber block is in contact with the claws of the other half of the coupling.When the coupling is working:
18
2020-01
The serpentine spring coupling is a metallic coupling with advanced structure, which transmits torque by means of serpentine springs.It has good damping performance, long service life, large load changes, and safe starting; high transmission efficiency, reliable operation, low noise, good lubrication, simple structure, convenient assembly and disassembly, and large installation deviations are allowed.snake..