28
2020-02
Higher requirements are put forward on the material, functionality, corrosion resistance and even decoration of the various parts and components that make up the mechanical equipment.The comprehensive performance of coupling rough parts and finished parts puts forward higher requirements, especially the continuous progress and improvement of the iron parts in the surface anti-rust process, from the original painting, alkali...
27
2020-02
In order to maintain a good production order, improve labor productivity, and ensure the smooth progress of production work, this management system is specially formulated.This system is applicable to all staff in the production workshop.Chapter 1 Production Management XNUMX. Production Discipline XNUMX. During the production process, production must be strictly in accordance with product specifications. ..
26
2020-02
In developed countries, polymer composite material technology and nanotechnology are usually selected. Polymer technology can be used on site to effectively improve repair power, and reduce repair costs and repair strength. Among them, the most widely used technology system is Mika Hua.Compared with traditional skills, polymer composite materials have both...
25
2020-02
1. Torque: Torque is the force that makes an object rotate.Engine torque refers to the torque output from the crankshaft end of the engine.Under the condition of fixed power, it is inversely proportional to the engine speed. The faster the speed, the smaller the torque, and vice versa. It reflects the load capacity of the car within a certain range. 2....
24
2020-02
Axial offset The axial distance that the coupling is allowed to move when connecting two shafts.The allowable offset angle when the angular offset coupler connects two shafts.High-precision couplings should be manufactured in accordance with the requirements of the standard and the drawings and technical documents approved by the prescribed procedures.The surface roughness of the shaft hole and shaft of the high-precision coupling is R..
21
2020-02
The oil pressure sensor, as its name implies, is that the measured value is pressure, which is a kind of hydraulic pressure sensor.It belongs to one of the more extensive uses of pressure sensors.In addition, the fuel tank fuel level sensor is a professional instrument for liquid level measurement of railway locomotives, automobile fuel tanks, tank cars, and oil depots.Mines, freight stations...
20
2020-02
The force analysis of the tensioned diaphragm found that: when the four sides are tensioned and the load is evenly distributed, the diaphragm will not break and fail; if the load distribution is uneven, it may be in the process of pulling the diaphragm. There was a phenomenon that several diaphragms were pulled off.Work in the case of long-term misalignment of the center, such as...
19
2020-02
In order to ensure the dynamic balance of the drive shaft, you should always pay attention to whether the balance pads are unsoldered.The new drive shaft assembly is provided as a complete set. When installing the new drive shaft, pay attention to the assembly mark of the telescopic sleeve and ensure that the flange fork is in a plane.When repairing and disassembling the drive shaft, the assembly mark should be printed on the telescopic sleeve and the flange shaft..
18
2020-02
The universal coupling has large angular compensation capability, compact structure and high transmission efficiency.It is suitable for transmitting torque in the mechanical shafting of petroleum machinery, heavy machinery, lifting and transporting machinery, rolling stock, construction machinery, metallurgical machinery, light industry machinery, precision machinery and control machinery and other heavy machinery industries. ..