Welcome to the website of Hangzhou Hengli Transmission Co., Ltd.; it mainly produces universal coupling series and transmission shaft series products.
28
2020-04
The main parameter of the pressure testing machine is the large test force, that is, how much pressure the test object can withstand before it deforms or breaks. The pressure is usually expressed in kilograms, and the unit is Newton N, kilonew KN (also useful "kg KG, ton T , Kilopascal KP” to express).The test range is generally based on the large test force..
27
2020-04
Vigorously develop the ability, push the development work forward as much as possible, until it is involved in the product development of the coupling user, and even develop before there is no clear user target, turning passive to active.At present, this method has been adopted in TV and monitor housings, air conditioner housings, motorcycle plastic parts, mobile phones and telephones..
26
2020-04
Diaphragm coupling mother body manufacturing.The choice of the matrix material of the diaphragm coupling is very important. Generally, the 45# or 40CR forging material should be selected and the rough machining should be carried out after the normalizing treatment. After the rough machining, the quenching and tempering treatment should be carried out to form the overall machine of the coupling material. The performance reaches its performance state, and the quality is...
25
2020-04
A welding device for a drive shaft includes a processing platform, a processing spindle, a mounting seat, a motor, a positioning structure, an ejection mechanism and a turning tool. The positioning structure is arranged on the processing platform and arranged at intervals on the front side of the processing spindle for positioning The position of the second axis to be processed so that the second axis to be processed and the axis to be processed are arranged coaxially..
23
2020-04
The loose parts are nothing more than universal joint cross bearings or steel bowl and flange fork, the spline shaft and spline sleeve of the telescopic sleeve.If the chassis makes a "humming" sound while the car is running, and the higher the running speed, the louder the sound.A serious failure of the dynamic balance of the drive shaft will cause damage to related components.It is common that the clutch shell is cracked..
22
2020-04
The diaphragm coupling is exquisite and can be easily damaged if it is misused during use or not installed correctly.Therefore, the deviation is within the tolerance range of the normal operation of the coupling.The application range of the diaphragm coupling is very wide, but the quality of the diaphragm coupling affects the transmission torque of the coupling and the use cost and use..
18
2020-04
1. There are heights at the left and right supports of the drive shaft bracket to make the rotor move left and right or the journal plane rubs against the support. 2. The support block is severely worn or the roller jumper increases. 3. There is dirt on the support and no lubricating oil is added. 4. The foundation on which the balancer is installed does not meet the requirements, the bottom joint surface is not padded, and the ground...
17
2020-04
Many automobiles are composed of many automobile parts, especially products like automobile transmission shafts, which are indispensable.This product is an indispensable part of a car. It is like a human without an arm. It is mainly composed of a telescopic sleeve, a universal joint and a shaft tube. The telescopic sleeve is...
16
2020-04
The purpose of adopting the snake spring coupling in the mechanical system is to allow it to withstand the misalignment during operation, so the half coupling should be mainly subjected to the following forces and moments during operation.Under the action of torque, the compression stress of the snake spring acting on the half coupling; because it is a high-speed snake spring coupling, the half coupling will be produced..
Contact: Jack
Consulting Hotline: 13756967288
Landline: 0523-86855968
Address: Xihu District, Hangzhou