Welcome to the website of Hangzhou Hengli Transmission Co., Ltd.; it mainly produces universal coupling series and transmission shaft series products.  

National Service Hotline
13756967288

Address
Xihu District, Hangzhou

Press Room

Factors affecting drive shaft balancing machine

来源:日期:2020/4/18 9:06:33

  1. The left and right supports of the drive shaft bracket are high and low, so that the rotor moves left and right or the journal plane rubs against the support.

  2. The support block is severely worn or the roller jumper increases.

  3. There is dirt on the support and no lubricating oil is added.

  4. The foundation on which the balancer is installed does not meet the requirements, the bottom joint surface is not padded, the anchor bolts are not tightened, or it is placed on the floor, causing resonance.

  5. The output signal of the sensor is abnormal.

  6. The fastening screws of the movable parts on the support frame of the drive shaft support are not tightened.

  7. The transmission belt does not meet the requirements and has obvious seams.

  8. The photoelectric head of the balancing machine is not aligned with the front and reflective paper, the mirror surface of the photoelectric head is blurred, and the position of the photoelectric head is skewed to cause an angle shift


0

News丨NEWS

Contact 丨CONTACT

  • Contact: Jack
  • Consulting Hotline: 13756967288
  • Landline: 0523-86855968
  • Address: Xihu District, Hangzhou
Home
电话
SMS
contact