Welcome to the website of Hangzhou Hengli Transmission Co., Ltd.; it mainly produces universal coupling series and transmission shaft series products.
10
2020-03
The drive shaft hanger is usually located in or below the middle beam of the frame. Some hangers are bolted into the beam, and some are hoisted under the beam.The hanger has double sets of ball bearings and a bearing seat, and a rubber ring pad of different shapes is used to attach between the periphery of the bearing seat and the hole of the hanger seat.Drive shaft is unbalanced..
09
2020-03
For the reliability and working environment of the coupling, coupling manufacturers usually use metal components that do not require lubrication. The couplings that require lubrication are more reliable; their performance is easily affected by the perfect degree of lubrication, and may polluted environment.Couplings containing non-metallic components such as rubber are resistant to temperature and corrosion..
07
2020-03
The diaphragm of the diaphragm coupling is fastened to the shaft sleeve with a pin. Generally, it will not loosen or cause backlash between the diaphragm and the shaft sleeve. This characteristic is a bit like a bellows coupling. In fact, the coupling transmits The way of torque is similar.The diaphragm itself is very thin, so it is easy to bend when the relative displacement load is generated, so it can...
06
2020-03
The nylon pin of the elastic pin gear coupling is a self-lubricating material and does not need lubrication, which not only saves lubricating oil, but also purifies the working environment.Applicable occasions: The elastic pin gear coupling has the performance of compensating the relative deviation of the two shafts to a certain extent. It is suitable for medium and large power transmissions. It is not suitable for certain requirements for vibration reduction and...
05
2020-03
The elastic pin coupling is composed of two halves, which are respectively connected with the driving shaft and the driven shaft.Elastic pin coupling is a mechanical part used to connect two shafts (driving shaft and driven shaft) in different mechanisms so that they can rotate together to transmit torque.In high-speed and heavy-duty power transmission, some couplings have cushioning and damping..
04
2020-03
Compact, rebound clutch without torque limit; instant separation against overload; permanent rebound without torque transmission; unmatched price-performance ratio; also anti-rust design; anti-rust torque limit clutch; stainless steel design; immediate disengagement situation Under overload; continuous rebound without torque transmission; delivery time:
03
2020-03
Among a wide range of couplings, the drum gear coupling has the advantages of small size, large transmission torque, strong ability to absorb coupling errors, and excellent durability. It is the most common coupling of two drive shafts in medium and heavy machinery. Parts.In engineering practice, due to manufacturing and installation errors, parts are deformed..
02
2020-03
Used for connecting coaxial lines, frequent starting, positive and negative changes, medium-speed, medium-torque transmission shafting and working parts that require high working reliability.It is not suitable for low-speed, heavy-duty and limited axial size, and the two shafts are difficult to align after replacing the elastic element.In order to facilitate disassembly, it is best to connect the two halves..
29
2020-02
Sensors have already penetrated into such a wide range of fields as industrial production, space development, ocean exploration, environmental protection, resource investigation, medical diagnosis, biological engineering, and even cultural relic protection.It is no exaggeration to say that from the vast space, to the vast ocean, to all kinds of complex engineering systems, almost...
Contact: Jack
Consulting Hotline: 13756967288
Landline: 0523-86855968
Address: Xihu District, Hangzhou