Welcome to the website of Hangzhou Hengli Transmission Co., Ltd.; it mainly produces universal coupling series and transmission shaft series products.
02
2020-04
Taking into account the end effect, a three-dimensional calculation model of the magnetic coupling was established on the basis of the traditional two-dimensional magnetic field solution analysis, and the ANSYS software was used to simulate and analyze the three-dimensional model. The total magnetic induction intensity distribution and the magnetic field intensity distribution at the air gap were obtained. Etc., and KTR's three-dimensional simulation of the magnetic coupling..
01
2020-04
A screaming noise from the drive shaft of a car.Although the abnormal noise can not be heard at any time, but when the car shifts reverse gear or forward gear, it will repeatedly make a light bumping sound.Solution: The common cause of abnormal noise of the drive shaft is a bad universal joint.When the universal joint is worn out, it will make a scream.The screaming noise is due to Wan...
30
2020-03
The drum gear coupling has a continuous multi-turn long slot. This coupling has excellent elasticity and a small bearing load. It can withstand deviations and is more suitable for correcting deflection and axial deviation , But the ability to deal with eccentricity is relatively poor, because it is necessary to bend the spiral groove in two different directions at the same time..
27
2020-03
Diaphragm coupling mother body manufacturing.The choice of the matrix material of the diaphragm coupling is very important. Generally, the 45# or 40CR forging material should be selected and the rough machining should be carried out after the normalizing treatment. After the rough machining, the quenching and tempering treatment should be carried out to form the overall machine of the coupling material. The performance reaches its performance state, and the quality is...
26
2020-03
The end of the drive shaft is connected by a flange with an ear fork. Due to its simple structure, it is easy to manufacture and assemble. It is a kind of connection form adopted.According to the centering method, there are two types: inner circle centering and outer circle centering; depending on the way of force transmission, there are rigid transmission and friction transmission.Comes with a single universal...
25
2020-03
For general bracket parts, it is completely reasonable to use the opposite surface of the bracket bottom surface as the rough reference.But for this part, if the opposite surface of the bottom of the bracket is used as the rough reference.Therefore, in accordance with the selection principle of the rough reference (that is, when the part has an unprocessed surface, these unprocessed tables should be used..
24
2020-03
After the current is disconnected, the magnetic powder quickly restores the non-excited state, releases the control of the clutch, and quickly restores the off state.Through the control of current, multiple functions of overload protection, clutch, no-load drive, torque adjustment, speed control, tension control, position control and commutation are realized.Torque control range:
23
2020-03
In the process of driving, a car will inevitably encounter rough and uneven road conditions. This kind of road conditions will cause the car to jump and the load will change. Then the output shaft of the transmission and the input shaft of the final drive will be clamped between the output shaft of the transmission and the input shaft of the final reducer. The angle and distance will change accordingly.At this time, the drive shaft's ten thousand...
21
2020-03
The gear coupling is composed of two halves, which are respectively connected with the driving shaft and the driven shaft.Generally, the power machine is mostly connected with the working machine by means of a gear coupling.As long as the shaft is connected to the shaft, gear couplings are almost always used.For the application of gear couplings, under normal circumstances, as long as there is a motor or reducer, it will be used..
Contact: Jack
Consulting Hotline: 13756967288
Landline: 0523-86855968
Address: Xihu District, Hangzhou