Since the coupling is used with other products in different host products, its working environment is a bit complicated and will be affected by temperature, water, dust, etc.When choosing coupling, you should consider these aspects according to your actual situation.

　　In some cases, the accuracy requirements are different.Let's investigate it first.Therefore, the working environment of the coupling is also necessary.Should cooperate with other parts, choose the type and variety of coupling.Understand the comprehensive role of coupling in the transmission system, combine the overall design of the transmission system, and select the type and type of coupling.

　　The standard coupling should be determined by comprehensive analysis of the drum gear coupling's carrying capacity, speed, relative displacement of the two shafts, buffering and vibration reduction, disassembly and assembly, and maintenance of the vulnerable drum gear coupling.Meet the requirements and working conditions.When assembling, remove burrs and clean all parts; when assembling, ensure that the center lines of the two welding fork head bearing holes in the middle are on the same plane, and the allowable deviation does not exceed 1 degree. The spline part slides freely and the joint rotates flexibly.

• Previous page:Causes and treatment of the wear of the universal joint cross shaft of the drive shaft
• Next page:When processing cardan shafts, it is necessary to follow the data of the national Ministry of Machinery standard