Outfitted using the zero leak bidirectional checking sole-noid valves, this electrical power unit is created to the operation of two independent circuits. Which are respectively for the key and subordinate platforms with the double scissors lift. Two cut-off valves are utilised for decreasing the machine manually in situation of energy reduction. If much more independent circuits are necessary for your application please make contact with us for availability.
Remark: one. Please talk to our revenue engineer for your distinct pump displacement, motor electrical power or tank capability.
2. CSA or UL certified motors can be found upon request.
1. The AC motor is of S3 duty cycle, which can only do the job intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
2. Clean all the hydraulic components concerned before set up of the electrical power unit.
three. Viscosity in the oil shoud be 15~46 cst,along with the oil need to be clean and no cost of impurities,N46 hydraulic oil is recommended.
4. The electrical power unit must be mounted vertically.
five. Check the oil degree within the tank just after the original running of your electrical power unit.
6. Oil modifying is needed after the original one hundred operation hours,afterwards when each and every 3000 hours.