Copper Reducer Bend

by | Jan 12, 2020 | jaw type coupling

Model NO. 9002R Certification ASME, ANSI Color Red Size 1/2"-2" Quality Control 100% Inspection Profile V Profile Copper Press Fitting Trademark GUTPRESS Transport Package Inner Box/Carton Specification 1/2" -2" Origin Taizhou. China HS Code 74121000

Product Description

pipe joining system copper reducer elbowDBW copper press 90° reducerelbow- For use with ASTM B88 tubing- Copper-Press connection- Components: EPDM sealing elements-Available in sizes 1/2"to 2"Model 9002R

Features and benefitsThe original copper press joining solutionAvailable in sizes 1/2"to 2", including elbows,couplings,tees,reducer, fitting reducer,caps,Customizable with three sealing elements,EPDM, HNBR,FKMleak detection feature identifies un-crimped connectionscompatible with most common pressing tools and jaws in the marketAll tubing must comply with the ASTM B88 standardOperating parameters:Operating pressure: 200PSI CWP maxOperating temperature range:-20°F-250°FApproved applications-Potable water- Hydronic heating-Chilled water- Compressed air-Non-medical gases-Low pressure steam

Installation Instructions

  • Cut tube square using atube cutter or fine tooth saw
  • Deburr tube ID using adeburring tool
  • Deburr tube OD using half round file
  • Check fittings bead to ensure seal is present. Do not use any type of oil lubrication
  • Mark tube to proper fitting insertion depth( see insertion depth chart below)

    • Fitting Insertion Depth Chart(1/2"-2")Tube size1/2"3/4"1"1-1/4"1-1/2"2"Insertion Depth3/4"7/8"7/8"1"1-7/16"1-9/16"

  • Turn slightly while sliding press fitting onto tube. Slide all the way to insertion mark and make contact with stop
  • Place press tool at aright angle over fitting bead .Start the pressing process. Please see specific tool manufacturer for tool instruction

    • FAQ

  • What is the DBW press fittings system rated for regarding pressure and temperature?

    • 200PSI over a temperature range of -20°F to 250°F

  • For what types of applications is the DBW system approved?

    • Residential and commercial plumbing and mechanical systems

  • For what types of media is the DBW systems designed?

    • Hot and cold domestic water, potable drinking and cooking water, condenser and chilled water, and water glycol mixtures of ethylene or propylene glycol up to 50% at 200° F

  • What products are included in DBW system offering?

    • Copper fittings in sizes 1/2"to 2"including couplings, elbows, tees, caps, adapters,fitting reducers.

  • What does EPDM stand for?

    • Ethylene-Propylene Diene MonomerCompany and production line view:

    Basic Info

    Model NO. 9002R Certification ASME, ANSI Color Red Size 1/2"-2" Quality Control 100% Inspection Profile V Profile Copper Press Fitting Trademark GUTPRESS Transport Package Inner Box/Carton Specification 1/2" -2" Origin Taizhou. China HS Code 74121000

    Product Description

    Customer Question & Answer Ask something for more details (0)

    pipe joining system copper reducer elbowDBW copper press 90° reducerelbow- For use with ASTM B88 tubing- Copper-Press connection- Components: EPDM sealing elements-Available in sizes 1/2"to 2"Model 9002R

    Features and benefitsThe original copper press joining solutionAvailable in sizes 1/2"to 2", including elbows,couplings,tees,reducer, fitting reducer,caps,Customizable with three sealing elements,EPDM, HNBR,FKMleak detection feature identifies un-crimped connectionscompatible with most common pressing tools and jaws in the marketAll tubing must comply with the ASTM B88 standardOperating parameters:Operating pressure: 200PSI CWP maxOperating temperature range:-20°F-250°FApproved applications-Potable water- Hydronic heating-Chilled water- Compressed air-Non-medical gases-Low pressure steam

    Installation Instructions

  • Cut tube square using atube cutter or fine tooth saw
  • Deburr tube ID using adeburring tool
  • Deburr tube OD using half round file
  • Check fittings bead to ensure seal is present. Do not use any type of oil lubrication
  • Mark tube to proper fitting insertion depth( see insertion depth chart below)

    • Fitting Insertion Depth Chart(1/2"-2")Tube size1/2"3/4"1"1-1/4"1-1/2"2"Insertion Depth3/4"7/8"7/8"1"1-7/16"1-9/16"

  • Turn slightly while sliding press fitting onto tube. Slide all the way to insertion mark and make contact with stop
  • Place press tool at aright angle over fitting bead .Start the pressing process. Please see specific tool manufacturer for tool instruction

    • FAQ

  • What is the DBW press fittings system rated for regarding pressure and temperature?

    • 200PSI over a temperature range of -20°F to 250°F

  • For what types of applications is the DBW system approved?

    • Residential and commercial plumbing and mechanical systems

  • For what types of media is the DBW systems designed?

    • Hot and cold domestic water, potable drinking and cooking water, condenser and chilled water, and water glycol mixtures of ethylene or propylene glycol up to 50% at 200° F

  • What products are included in DBW system offering?

    • Copper fittings in sizes 1/2"to 2"including couplings, elbows, tees, caps, adapters,fitting reducers.

  • What does EPDM stand for?

    • Ethylene-Propylene Diene MonomerCompany and production line view: