Model NO. 14/12 ST-G Position of Pump Shaft Horizontal Pump Pump Casing Combined Horizontal Split Pumps Mounting Height Since Irrigation Centrifugal Pumps Impeller Open Usage Pumps Mqq 1 Set Speed(R/Min) 300-1400 Capacity(L/S) 10-1000 Head(M) 3.5-72 Efficiency 30%-72% Npshr(M) 2.5-6 Allowed Max Particle Size(mm) 82-254 Pump Weight(Kgs) 460-12250 Discharge Dia.(mm) 100-350 Suction Dia.(mm) 150-400 Seal Type Gland Shaft Seal/Mechanical Seal/Expeller Seal Wet End Parts Rubber or Metal Trademark Naipu Or EPT Transport Package Packed with Wooden Box or as Customer′s Request Specification CE, ISO, SGS Origin Shijiazhuang, China HS Code 8413910000

Product Description

14/12 ST-G Jaw Crusher Mine machinery slurry sand Transport Pump1.Features of Gseries Gravel Pumps1.The structure of this ZJS series gravel pump is mainly single-casing and horizontal. The outlet direction can be positioned 360° easy to install.2.Shaft Components adopt cylinder structure, which is convenient to adjust the gap between impeller and front wearing plate. The shaft uses grease lubrication.3.Shaft Seal: expeller drive seal, packing seal, and Mechanical seal.4.Broad Flow Passage &Good Anti-Cavitation Property &Highly Efficient Wear Resistance.5.Driving Method: VBelt Drive, Elastic Shaft Coupling Transmission, Gear Box Drive, Fluid Coupling Transmission, Variable Frequency Drive Device and Thyristor Speed Control.6.The wet parts are made of Ni-hard and high-chrome wear-resistant alloys with good anti-corrosive property.7.Variable speeds and modals to ensure smooth operation. Additionally, Long service life and high operation efficiency offer reliable performance in atough operating environment.2.Applications of the Single Casing PumpThe mining gravel pump is used for river course, reservoir desalting, coastal reclamation, stretching, deep-sea mining and tailing acquisition etc.3.Product Overview4.Other Related ProductsNaipu Main Slurry Pump Models NP-AHNP-HHNP-SPNP-GNP-AFNP-LNP-M1.5/1B-AH(R)1.5/1C-HH40PV-SP(R)6/4D-G3QV-AF20A-L10/8R-M2/1.5B-AH(R)3/2D-HH65QV-SP(R)8/6E-G4RV-AF50B-L(R)10/8E-M3/2C-AH(R)4/3E-HH100RV-SP(R)10/8F-G6SV-AF75C-L4/3C-AH(R)4/3X-HH150SV-SP(R)12/10G-G8SV-AF100D-L6/4D-AH(R)6/4X-HH200SV-SP(R)14/12G-G150E-L6/4E-AH(R)6/4F-HH250TV-SP14/12T-G300S-L8/6E-AH(R)6S-H16/14G-G350FF-L8/6R-AH(R)6S-HP16/14TU-GH450ST-L10/8F-AH(R)8/6S-H18/16G-G10/8ST-AH(R)8/6S-HP18/16TU-GH12/10ST-AH(R)8/6X-HP12/10FF-AH(R)14/12G-AH(R)14/12ST-AH(R)16/14TU-AH(R)20/18TU-AH(R)5.Pump PartsMaterial DescriptionThe Parts have exchangeableMaterial selectionMetal (A05, A49, A07),Elastomer(R08, R26 ,R33, R55) and Polyurethane (U01)

Metal parts

1.A05 is awear resistant white iron that offers excellent performance under erosive conditions. The alloy can be effectively used in awide range of slurry types. The high wear resistance of alloy A05 is provided by the presence of hard carbides within its micro-structure. Alloy A05 is particularly suited to applications where mild corrosion resistance, as well as erosion resistance is required.2.A07 Marten-sic white iron with moderate erosion resistance.3.A49 is suitable for low pH corrosion duties, where erosive wear is also aproblem. The alloy is particularly suitable for Flue Gas Desulphu-rization(FGD) and other corrosive applications, where the pH is less than 4. The alloy can also be used in other mildly acidic environments. A49 has an erosion resistance similar to that of Ni-Hard 1.Rubber:1.RU08 is ablack natural rubber, of low to medium hardness. RU08 is used for impellers where superior erosive resistance is required in fine particle slurries.2. RU26 is ablack, soft natural rubber. RU26 is used for lines where superior erosion resistance to all other materials in fine particle slurry applications.3. RU33 is apremium grade black natural rubber of low hardness and is used for cyclone and pump liners and impellers where its superior physical properties give increased cut resistance to hard, sharp slurries.4. RU55 is premium grade black natural rubber, it is suitable for severe erosive fine particleEPT Pump Parts:Except standard parts or material,we also undertake EPT service if you supply us the drawings or samples;we also can do special materials ,such as hastelloy alloy,Ceramic coated parts etc.Our Workshop ShowWe are factory of sand slurry pumps,dredging pumps etc.We have Mould workshop,Casting Workshop,Machining Workshop,Testing Workshop,Assembly Workshop etc.Quality Control SystemWe have about 30 inspectors and We always do the testing before delivery.Application On SiteAsh slurry in Thermal Power Stations /Iron Ore in Beneficiation Plants/ Aluminum Industries/Lime Mud SlurryCoal Slurries and Flotation Tailings / Sand Water Mixtures / Liquid of abrasive coarse Grained Solids/ Heavy Mining / Mineral Processing / Coal Preparation / Cyclone Feeds / Aggregate Processing / Fine Primary Mill Grinding /Chemical Slurry Service/ Tailings / Secondary Grinding / Industrial Processing /Pulp and Paper /Food Processing / Cracking Operations / Ash Handling / Pipeline Transport /High Velocity Hydraulic Transport /Food Processing / Explosive Sludge in Metal Smelting /River and Pond Dredging /Heavy Refuse Removal /Large Particle or Low NPSHA Applications /Continous Sump Pump Operation/ Abrasive Slurries /High Density Slurries /Large Particle Slurries /Sump Drainage /Washdown /Floor Drainage Mixing /Iron Ore /Copper /Diamond /Alumina /Coal /Gold /Phosphorite /Steel / Palm /Sugar / Chemical /Power /FGD /Frac Sand Blending /Construction / City Sewage /Dewatering /Crushing /Silver / Mill Liners /Ball Mill /Rod Mill etc.FAQ1.Q: What’s yourfactory workshops? A:Ourfactory manufacture include casting, machiningprocess, lathe process, heat treatment, assembly, test and packaging etc. Warmly welcome to visit & inspectourfactory any time.2.Q: Could you help us if we don’t know which pump model we need ? A:Yes, please tell me your detail requirements, Such as capacity, head ,solid density etc.3.Q: How about your price? A:We are sure our price isfactory price, and are ofhighquality for our long term cooperation.4.Q: What is yourSlurry Pumpmaterial ? A:slurry pump material high chrome alloyor rubber, super abrasive-resistant metal. Shaft material is stainless steel alloy.5.Q:How does your factory do regardingquality control? A:Quality is priority. Our factory has 15~30 QC.We always attach great importance to quality controlling from the very beginning to the very end. 6.Q: Is it easy for customers to change the parts by themselves? A:Yes, the structure is simple ,customers can change it veryeasily. We will also supply you maintenance tools for free.7.Q: How to do if the pump or parts have operationproblem within thewarranty? A:Tell me details and show me pictures, we will send yousolutionat once without any hesitation.Contact USShijiazhuang Naipu Pump Co.,LtdNo.368 Xinshi North Road,Shijiazhuang,Hebei,China.

Basic Info

Model NO. 14/12 ST-G Position of Pump Shaft Horizontal Pump Pump Casing Combined Horizontal Split Pumps Mounting Height Since Irrigation Centrifugal Pumps Impeller Open Usage Pumps Mqq 1 Set Speed(R/Min) 300-1400 Capacity(L/S) 10-1000 Head(M) 3.5-72 Efficiency 30%-72% Npshr(M) 2.5-6 Allowed Max Particle Size(mm) 82-254 Pump Weight(Kgs) 460-12250 Discharge Dia.(mm) 100-350 Suction Dia.(mm) 150-400 Seal Type Gland Shaft Seal/Mechanical Seal/Expeller Seal Wet End Parts Rubber or Metal Trademark Naipu Or EPT Transport Package Packed with Wooden Box or as Customer′s Request Specification CE, ISO, SGS Origin Shijiazhuang, China HS Code 8413910000

Product Description

Customer Question & Answer Ask something for more details (0)

14/12 ST-G Jaw Crusher Mine machinery slurry sand Transport Pump1.Features of Gseries Gravel Pumps1.The structure of this ZJS series gravel pump is mainly single-casing and horizontal. The outlet direction can be positioned 360° easy to install.2.Shaft Components adopt cylinder structure, which is convenient to adjust the gap between impeller and front wearing plate. The shaft uses grease lubrication.3.Shaft Seal: expeller drive seal, packing seal, and Mechanical seal.4.Broad Flow Passage &Good Anti-Cavitation Property &Highly Efficient Wear Resistance.5.Driving Method: VBelt Drive, Elastic Shaft Coupling Transmission, Gear Box Drive, Fluid Coupling Transmission, Variable Frequency Drive Device and Thyristor Speed Control.6.The wet parts are made of Ni-hard and high-chrome wear-resistant alloys with good anti-corrosive property.7.Variable speeds and modals to ensure smooth operation. Additionally, Long service life and high operation efficiency offer reliable performance in atough operating environment.2.Applications of the Single Casing PumpThe mining gravel pump is used for river course, reservoir desalting, coastal reclamation, stretching, deep-sea mining and tailing acquisition etc.3.Product Overview4.Other Related ProductsNaipu Main Slurry Pump Models NP-AHNP-HHNP-SPNP-GNP-AFNP-LNP-M1.5/1B-AH(R)1.5/1C-HH40PV-SP(R)6/4D-G3QV-AF20A-L10/8R-M2/1.5B-AH(R)3/2D-HH65QV-SP(R)8/6E-G4RV-AF50B-L(R)10/8E-M3/2C-AH(R)4/3E-HH100RV-SP(R)10/8F-G6SV-AF75C-L4/3C-AH(R)4/3X-HH150SV-SP(R)12/10G-G8SV-AF100D-L6/4D-AH(R)6/4X-HH200SV-SP(R)14/12G-G150E-L6/4E-AH(R)6/4F-HH250TV-SP14/12T-G300S-L8/6E-AH(R)6S-H16/14G-G350FF-L8/6R-AH(R)6S-HP16/14TU-GH450ST-L10/8F-AH(R)8/6S-H18/16G-G10/8ST-AH(R)8/6S-HP18/16TU-GH12/10ST-AH(R)8/6X-HP12/10FF-AH(R)14/12G-AH(R)14/12ST-AH(R)16/14TU-AH(R)20/18TU-AH(R)5.Pump PartsMaterial DescriptionThe Parts have exchangeableMaterial selectionMetal (A05, A49, A07),Elastomer(R08, R26 ,R33, R55) and Polyurethane (U01)

Metal parts

1.A05 is awear resistant white iron that offers excellent performance under erosive conditions. The alloy can be effectively used in awide range of slurry types. The high wear resistance of alloy A05 is provided by the presence of hard carbides within its micro-structure. Alloy A05 is particularly suited to applications where mild corrosion resistance, as well as erosion resistance is required.2.A07 Marten-sic white iron with moderate erosion resistance.3.A49 is suitable for low pH corrosion duties, where erosive wear is also aproblem. The alloy is particularly suitable for Flue Gas Desulphu-rization(FGD) and other corrosive applications, where the pH is less than 4. The alloy can also be used in other mildly acidic environments. A49 has an erosion resistance similar to that of Ni-Hard 1.Rubber:1.RU08 is ablack natural rubber, of low to medium hardness. RU08 is used for impellers where superior erosive resistance is required in fine particle slurries.2. RU26 is ablack, soft natural rubber. RU26 is used for lines where superior erosion resistance to all other materials in fine particle slurry applications.3. RU33 is apremium grade black natural rubber of low hardness and is used for cyclone and pump liners and impellers where its superior physical properties give increased cut resistance to hard, sharp slurries.4. RU55 is premium grade black natural rubber, it is suitable for severe erosive fine particleEPT Pump Parts:Except standard parts or material,we also undertake EPT service if you supply us the drawings or samples;we also can do special materials ,such as hastelloy alloy,Ceramic coated parts etc.Our Workshop ShowWe are factory of sand slurry pumps,dredging pumps etc.We have Mould workshop,Casting Workshop,Machining Workshop,Testing Workshop,Assembly Workshop etc.Quality Control SystemWe have about 30 inspectors and We always do the testing before delivery.Application On SiteAsh slurry in Thermal Power Stations /Iron Ore in Beneficiation Plants/ Aluminum Industries/Lime Mud SlurryCoal Slurries and Flotation Tailings / Sand Water Mixtures / Liquid of abrasive coarse Grained Solids/ Heavy Mining / Mineral Processing / Coal Preparation / Cyclone Feeds / Aggregate Processing / Fine Primary Mill Grinding /Chemical Slurry Service/ Tailings / Secondary Grinding / Industrial Processing /Pulp and Paper /Food Processing / Cracking Operations / Ash Handling / Pipeline Transport /High Velocity Hydraulic Transport /Food Processing / Explosive Sludge in Metal Smelting /River and Pond Dredging /Heavy Refuse Removal /Large Particle or Low NPSHA Applications /Continous Sump Pump Operation/ Abrasive Slurries /High Density Slurries /Large Particle Slurries /Sump Drainage /Washdown /Floor Drainage Mixing /Iron Ore /Copper /Diamond /Alumina /Coal /Gold /Phosphorite /Steel / Palm /Sugar / Chemical /Power /FGD /Frac Sand Blending /Construction / City Sewage /Dewatering /Crushing /Silver / Mill Liners /Ball Mill /Rod Mill etc.FAQ1.Q: What’s yourfactory workshops? A:Ourfactory manufacture include casting, machiningprocess, lathe process, heat treatment, assembly, test and packaging etc. Warmly welcome to visit & inspectourfactory any time.2.Q: Could you help us if we don’t know which pump model we need ? A:Yes, please tell me your detail requirements, Such as capacity, head ,solid density etc.3.Q: How about your price? A:We are sure our price isfactory price, and are ofhighquality for our long term cooperation.4.Q: What is yourSlurry Pumpmaterial ? A:slurry pump material high chrome alloyor rubber, super abrasive-resistant metal. Shaft material is stainless steel alloy.5.Q:How does your factory do regardingquality control? A:Quality is priority. Our factory has 15~30 QC.We always attach great importance to quality controlling from the very beginning to the very end. 6.Q: Is it easy for customers to change the parts by themselves? A:Yes, the structure is simple ,customers can change it veryeasily. We will also supply you maintenance tools for free.7.Q: How to do if the pump or parts have operationproblem within thewarranty? A:Tell me details and show me pictures, we will send yousolutionat once without any hesitation.Contact USShijiazhuang Naipu Pump Co.,LtdNo.368 Xinshi North Road,Shijiazhuang,Hebei,China.