ep

January 18, 2021

General Description
Consisting of the stress balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this electrical power unit is designed to operate materials managing tools. The reducing movement is achived by the solenoid valve using the decreasing pace managed by an adjustable needle valve. The left and proper functions are outfitted with a dual pilot operated check out valve and cross-over relief valves.
Remark: Please check with our product sales engineer for that distinctive pump displacement, motor energy or tank capacity.
Unique Notes
1. This power unit is of S3 duty cycle, i.e.,non-continuous operation,thirty seconds on and 270 seconds off.
two. Clean the many hydraulic components concerned prior to installation of the electrical power unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst, which must also be clean and free of impurities.N46 hydraulic oil is suggested.
four. This electrical power unit must be mounted horizontal.
5. Check the oil level in the tank after the first start out with the electrical power unit.
6. Oil transforming is needed just after the initial 100 operation hrs, afterwards as soon as just about every 3000 hrs.